品牌:RETZ/我们一直致力于流体控制和测控领域的持续创新,始于2005……RS200气体质量流量计是基于热式测量原理,结合流量传感器芯片,打造的一款性能出色、稳定可靠的气体质量流量计。该产品通过测量电阻变化,计算被测量气体的质量流量,具有直观、精准、稳定、耐高低温、线性好、响应时间快等优点;内部搭载了LCD显示屏进行读数显示,可显示瞬时流量与累计流量,屏显内容可实现90°旋转,以适应用户不同的安装角度retz gas mass flowmeter is a high-performance, stable and reliable gas mass flowmeter based on the principle of thermal measurement and combined with flow sensor chips. This product calculates the mass flow rate of the measured gas by measuring resistance changes, and has the advantages of being intuitive, accurate, stable, resistant to high and low temperatures, good linearity, and fast response time; Internally equipped with an LCD display screen for reading display, which can display instantaneous and cumulative flow rates. The screen display can rotate 90 ° to adapt to different installation angles of users
应用行业
应用于监测空气、氮气、氩气、二氧化碳、氧气等干燥洁净无腐蚀性气体(易燃易爆 炸气体除外)的质量流量,可广泛应用于高校科研、消防、环境监测、烟草、智慧农业、食品、医药等行业Applied to monitor the mass flow rate of dry, clean, and non corrosive gases (excluding flammable and explosive gases) such as air, nitrogen, argon, carbon dioxide, and oxygen, it can be widely used in industries such as university research, fire protection, environmental monitoring, tobacco, smart agriculture, food, and medicine
进口小流量气体质量流量计特点
集成质量流量与温度测量
多量程,从0~50mL/min到0~ 500L/min
重复性好
支持多种气体测量
标准 Modbus-RTU 通信
LCD 屏显示(可支持上下左右四个显示方向设置)
9~24V DC 电源供电
进口小流量气体质量流量计量程对照表
型号 | 量程 | 显示单位 | 重量 | 机械接口规格 | 进/出气接口内径 |
RS200R0 | 0~500L/min | 瞬时流量: (一位小数) | 约203g | RC1/2 | 15mm |
RS200R1 | 0~300L/min | 约202g | |||
RS200R2 | 0~200L/min | ||||
RS200R3 | 0~100L/min | 约223g | RC3/8 | 10mm | |
RS200R4 | 0~50L/min | ||||
RS200R5 | 0~25L/min | 约234g | RC1/4 | 7mm | |
RS200R6 | 0~10L/min | ||||
RS200R7 | 0~2L/min | 瞬时流量:(两位小数) | 约235g | ||
RS200R8 | 0~500mL/min | 瞬时流量:(一位小数) | |||
RS200R9 | 0~50mL/min | 约234g |